Pneumatic Connections - EKOM DK50 PLUS Benutzerhandbuch

DK50 PLUS, DK50 2V
Adding sound-insulating material into the cabinet
A component from the sound-insulating material is to be installed in the opening of the cabinet of
the compressor without a dryer.
This component is provided in the basic equipment delivered with the product.
A
C

PNEUMATIC CONNECTIONS

Connecting to the compressed air outlet (Fig. 6)
The pressure line (2) is attached to the compressed air outlet
(1) on the compressor. Run the hose to the compressed air
manifold or directly to the dental set.
Route the pressure hose through the opening in the rear wall of the cabinet for cabinet-mounted
compressors. (Fig. 8)
07/2021
2
Fig. 6
- 29 -
B
1
NP-DK50 PLUS, 2V-14_07-2021-MD