HEIDELBERG Suprasetter 145 Installation Seite 123

If these standard settings are used, steps
skipped and the APL can be enabled directly in the "CTP User Interface" (see
Configuration in the GUI", page
If the standard settings are changed, these modifications must also be made on the APL and
both devices must be restarted.
6. In the "CTP User Interface" in "Tools" (Fig. 16/1), activate "Enable Recorder Terminal" and open
the recorder terminal (Fig. 16/2).
7. Enter your password and confirm the dialog with "OK" (Fig. 16/3).
Fig. 16 Enable Recorder Terminal
Suprasetter 145/162/190 – Installation
6 thru 19 (Working on the Recorder Terminal) are
123).
Optional Components
"Select APL
121