Installing Recorder Software - HEIDELBERG Suprasetter 145 Installation

Installing recorder software

Fig. 117 Connection between recorder and PC
Note: For installation, follow the instructions in the "Linux_Install...pdf" and "Revision-His-
tory.pdf" documents on the USB stick.
Fig. 118 Affixing of the USB stick
Suprasetter 145/162/190 – Installation
The required CtP recorder software is shipped on
a USB stick. The USB stick is secured with a cable
tie near the safety switch in the Suprasetter and
must also be re-attached there after installation
(Fig. 118).
The USB stick contains the software version that is
required for installation of the Suprasetter. If a
more recent software is available at the time of
installation, installation can be updated subse-
quently.
In addition, the USB stick contains the parameter
database as delivered as "data_all.txt".
Installation
103