Software Installation; Making Connection With The Activy Media Server 150 - Fujitsu SIEMENS ACTIVY 150 Benutzerhandbuch

Note: a) You have to power on your eSATA device before powering on the
ACTIVY Media Server 150. Otherwise, your eSATA device won't be
detected.
b) Some vendors of external eSATA devices do not supply the correct
cable. Only standardized eSATA plugs can be connected to the
ACTVY Media Server 150.

2.2 Software Installation

2.2.1 Making Connection with the ACTIVY Media Server 150

The ACTIVY Media Server 150 is set to act as a DHCP client as default. This
means that in most network environments, the device will receive a network
address automatically. No further network setup is needed. If you experience
difficulties to connect to the ACTIVY Media Server 150, please refer to the section
Troubleshooting in this manual
Map a drive letter to a folder on the ACTIVY Media Server 150
By mapping your ACTIVY Media Server 150, you can access it easily in My
Computer. Press Start button on Windows desktop => Press Search => Press
"Computer or People" => Press "A computer on the network" and a new window
will appear. => Type AMS150 in the Computer Name field and then press Search
button.
You will see the following window.
Point to the "Network-HD (ams150)", double click with the mouse.
Choose the folder you want to map, click mouse on its right button and click Map
ACTIVY Media Server 150
8