HBM ClipX Bedienungsanleitung Seite 96

Starting up the ClipX
Start by a limit value
Signal at
Input
0
1
0
2
Fig. 43: Automatic mean; Start via limit value
The specified limit value is used in the example for both start conditions. Use a
User-defined Constant (Calculated Channels menu at bottom) for the limit
value. Also set the Start Measure with and Start Zeroing with conditions to 0
(internal constant).
94
3 4
Meas. Meas.
Delay Time
Update of Maximum Value,
Minimum Value, Peak-to-Peak
and Mean
A04643_04_X00_03 HBM: public
5 6
Zero Tracking
Delay
Threshold
Measured Value
7 2
Zero
Tracking
Time
Update Offset
t
Ready Flag
Status
ClipX