User Management - HBM ClipX Bedienungsanleitung

Starting up the ClipX
4. If the ClipX has successfully detected the button presses, the system LED
flickers yellow and the ClipX reboots. The fixed IP address is then set.
Otherwise, you have up to three minutes in which to repeat the sequence.
5. Wait for the reboot to complete before connecting to the device.
>0.5s
Fig. 37: Sequence of button presses for the fixed IP address 192.168.0.234
Ethernet port settings afterwards
• Fixed IP address (do not use DHCP).
• IP address: 192.168.0.234.
• Subnet mask: 255.255.255.0.
• Device name: ClipX.
• All gateway or DNS settings are cleared.
Your PC must be using an address from the range 192.168.0.1 to
192.168.0.233 or 192.168.0.235 to 192.168.0.254 for a connection to
be made.
7.3

User Management

After connecting via the browser, you are initially at the Operator user level
(Symbol ). Click on the icon at the top right of the window to select a different
user level: Maintenance (Symbol
User management enables you to restrict access to the ClipX menus through a
browser. The default setting is for no password to be set and you can switch
directly to a different user level. But you can set a different password for both the
Maintenance and Administrator user levels, thus restricting access to the set-
tings.
82
>0.5s
<3s
A04643_04_X00_03 HBM: public
>0.5s
<3s
) or Administrator (Symbol ).
ClipX