Stopping The Motor - probst SH-3500-B Betriebsanleitung

WARNING
Releasing the load
5. Work the operator handle to lower (see figure above according to model).
The load is released.
6. Raise the lifting device.

Stopping the motor

1. Move the motor switch to the OFF position.
2. Close the fuel valve.
3. Drain condensation if necessary (see chapter 9.9).
CAUTION
41
Danger due to tilting parts
►
The load must be securely on the floor or in a suitable storage device before
releasing the load from the lifting device.
►
Before releasing the load from the lifting device, it must be secured from sliding or
tilting as necessary.
Standard
Press both buttons at the same time to release.
Accident hazard if used by unauthorized persons
►
Ensure that the lifting device is parked where it cannot be accessed by
unauthorized persons.
►
Remove the ignition key and keep it inaccessible to unauthorized persons.
OPERATION
Remote control option