Adjustments; Adjusting The Height-Adjustable Support - probst RG-SAFELOCK Betriebsanleitung

Adjustments

5 Adjustments
Caution while adjustment work. There is danger of injuring the hands!
Use safety gloves! →
5.1

Adjusting the height-adjustable support

The height-adjustable support is set as follows:
1. Measuring the outer diameter of the pipe in cm
2. Pull the spring bolt (A) upwards and turn it by 180°
(Fig. 1)
3. Move rectangular tube (B) until the correct
immersion depth is set (see window)
4. Pull the spring bolt (A) upwards again and turn it by
180.
5. Push the rectangular tube (B) back and forth until
the spring bolt engages in the corresponding hole.
The height-adjustable support must always be set so that the
gripper jaws always grip the concrete pipe below the centre!
Otherwise there is a danger of slipping!
5450.0006
B
V1
Fig. 1
13 / 22
A
GB