SAFETY INSTRUCTIONS
WARNING
•
The functioning and condition of the lifting device must be inspected before every use (see chapter
6.2).
•
Maintenance, lubrication and correction of faults may be performed on the lifting device only
when it is not in use.
•
If faults compromising safety are found, the faults must be completely rectified before the lifting
device is used again.
•
If cracks are found on load-bearing parts, the lifting device may not be used for any purpose.
•
The lifting device operating instructions must be accessible on site at all times.
•
The type plate on the lifting device may not be removed.
•
Illegible indicating signs must be replaced.
Installation location/workplace requirements
Installation location requirements
DANGER
WARNING
12
The user's company must ensure by means of internal measures that all
persons at the company commissioned with the task of setting up, starting,
operating, maintaining and repairing the lifting device employ only insured
persons who:
• Are at least 18 years of age and are mentally and physically fit for the task
• Have been trained in operating and maintaining the lifting device
• Have read and understood the operating and maintenance instructions
• Can be expected to reliably perform the tasks assigned to them
The operating and maintenance instructions must be accessible at all times and
retained for use at a later date.
Risk of injury from misuse and from disregarding of warning and safety notices
►
The equipment must be used only by trained personnel.
►
Follow local regulations on work breaks to prevent accidents due to negligence.
Switching components that are not explosion-proof
Risk of fire and explosion
►
The lifting device may not be used in areas exposed to explosion hazards.
Risk of explosion from flammable substances being sucked in
►
Before setting up the lifting device, ensure that no flammable material (fuel,
solvents, etc.) can be sucked into it.