Suction Connection; Discharge Connection - probst SH-3500-B Betriebsanleitung

5 | Installation

5.2.1 Suction Connection

5.2.2 Discharge Connection

8 / 24
NOTICE
Intruding foreign objects or liquids.
Risk of damage to the machine!
In case of the inlet gas contains dust or other foreign solid particles:
• Install a suitable filter (5 micron or less) upstream the machine.
Connection size:
– G1 1/4
Depending on the specific order, other connection dimensions may apply.
CAUTION
The discharge gas contains small quantities of oil.
Risk to health!
If air is discharged into rooms where persons are present:
• Make sure that sufficient ventilation is provided.
Connection size:
Depending on the specific order, other connection dimensions may apply.
• Make sure that the discharged gas will flow without obstruction. Do not shut off or
throttle the discharge line or use it as a pressurised air source.
Unless the aspirated air is discharged to the environment right at the machine:
• Make sure that the discharge line either slopes away from the machine or provide a li-
quid separator or a drip leg with a drain cock, so that no liquids can flow back into the
machine.
0870157201_RA0025-0040F_A0002_IM_en