Extraordinary Mounting Procedure; Approved Uhp And Run Flat Tyre Demounting And Mounting Procedure - Corghi ARTIGLIO 50 Betriebsanleitung

3
6.8. "EXTRAORDINARY" MOUNTING
PROCEDURE
- One variation of the mounting procedure explained
above may be adopted in case of rims with very
small or non-existent drop centre (fig.41a). In these
exceptional cases, the mounting procedure can be
facilitated by using a variant of the normal procedure.
- The first bead is mounted in the usual
way. To mount the second bead, position
the mobile tool as during the demounting
search stage (fig.41b).
- This reduces the stresses, leaving more
space for the tyre. The following operations
illustrated from fig.39a onward remain
unchanged.
6.9. APPROVED UHP AND RUN FLAT TYRE DEMOUNTING AND
MOUNTING PROCEDURE
For this type of tyre please refer to the instructions in the manual prepared by WDK
(German Tyre Industry Association).
138
A
Artiglio 50/55 User Manual
40
41a
A
41b