Installing A 3.5-Inch Drive Adapter Into The 3.5-Inch Drive Carrier; Drive Backplane Bracket; Removing The Drive Bay 1 Backplane Bracket - Dell EMC PowerEdge R740xd2 Installations- Und Servicehandbuch

Nächste Schritte
Install the 3.5-inch drive adapter into the 3.5-inch drive carrier.
Installing a 3.5-inch drive adapter into the 3.5-inch drive
carrier
Voraussetzungen
1. Follow the safety guidelines listed in
2. Install the 2.5-inch drive into the 3.5-inch drive
Schritte
1. Insert the 3.5-inch drive adapter into the 3.5-inch drive carrier with the connector end of the drive toward the back of the 3.5-inch
drive carrier.
2. Align the screw holes on the 3.5-inch drive adapter with the holes on the 3.5-inch drive carrier.
3. Using a Phillips #1 screwdriver, secure the 3.5-inch drive adapter to the 3.5-inch carrier.
Abbildung 50. Installing a 3.5-inch drive adapter into the 3.5-inch drive carrier
Nächste Schritte
1. Install the 3.5-inch drive carrier into the
2. If removed, install the front

Drive backplane bracket

Removing the drive bay 1 backplane bracket

Voraussetzungen
ANMERKUNG: Ensure that the drive bay 1 and 2 is in open position to access the backplane bracket.
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. If installed, remove the front
4. Remove all the drives from drive bay 1.
74 Installing and removing system components
Safety instructions.
adapter.
system.
bezel.
Safety instructions.
Before working inside your system.
bezel.