Getting Started With The Model; Charging The Flight Battery - Reely SKY Yellow Bird Bedienungsanleitung



10. Getting started with the model

a) Charging the flight battery
• Before starting the model, you have to charge
the flight battery (1).
An appropriate plug-in battery charger (2) is
included in the delivery.
• Connect the flight battery with the connector
that is protected against polarity reversal (3)
of the plug-in battery charger.
The locking mechanism on the plug of the
charging cable has to slide over the latch of
the rechargeable battery plug and snap in.
• Now connect the plug-in battery charger to a
230 V/50 H mains socket.
For photo-technical reasons, the charging cable of the plug-in mains unit is illustrated in
the wound-up state. Before the first use, the cable retainer should be opened and the
cable be unwound.
Important!
The charging process is completed after a maximum of 2.5 hours. After that, the recharge-
able battery has to be disconnected from the battery charger and the battery charger
disconnected from the mains socket.
If the rechargeable battery is only partly discharged, the charging process must be stopped
earlier.
For that purpose, check the temperature of the rechargeable battery manually in regular
intervals.
Once the rechargeable battery is completely charged, the charging current is completely
transformed into heat. Thus, the temperature of the rechargeable battery increases no-
ticeably.
To prevent a shape distortion of the plastic parts inside the helicopter model in the case
of a possible development of heat, we recommend removing the rechargeable battery
from the model for charging.
Supervise the charging process and do not charge the rechargeable battery unattended!
Figure 3
33