Spl-Signale (Safety Integrated) (Db18); Parametrierteil; Datenbereich / Fehler - Siemens SINUMERIK 840D sl Handbuch

2 PLC-Anwendernahtstelle

2.6 SPL-Signale (Safety Integrated) (DB18)

2.6 SPL-Signale (Safety Integrated) (DB18)

2.6.1 Parametrierteil

Literatur: Funktionshandbuch SINUMERIK Safety Integrated
DB18
Bit 7
Byte
DBB0-
DBB34
DBB36
DBB37

2.6.2 Datenbereich / Fehler

DB18
Bit 7
Byte
DBD38
DBD42
DBD46
DBD50
DBD54
DBD58
DBD62
DBD66
DBD70
DBD74
DBD78
2-402
SPL-Signale (PLC → PLC)
Bit 6 Bit 5 Bit 4
SPL-Signale (PLC ←→ NCK)
Bit 6 Bit 5 Bit 4
Datenbereich der SPL Ein-/Ausgänge
SPL_DATA.INSEP [1..32]
SPL_DATA.INSEP [33..64]
SPL_DATA.OUTSEP [1..32]
SPL_DATA.OUTSEP [33..64]
Datenbereich für Anwender-SPL
SPL_DATA.INSIP [1..32]
SPL_DATA.INSIP [33..64]
SPL_DATA.OUTSIP [1..32]
SPL_DATA.OUTSIP [33..64]
SPL_DATA.MARKERSIP [1..32]
SPL_DATA.MARKERSIP [33..64]
Pegelunterschied NCK - PLC zur Diagnose
SPL_DELTA.INSEP [1..32]
SINUMERIK 840D sl, SINAMICS S120 Listenhandbuch (LIS2sl) - 09/2011
Bit 3 Bit 2 Bit 1
Stop E
Bit 3 Bit 2 Bit 1
© Siemens AG 2011 All Rights Reserved
09/2011
Bit 0
SPL ready
Bit 0