Abus Terxon MX Installationsanleitung Seite 166

5. The control unit acknowledges your input with a
double "beep" tone and shows Installer mode.
068 Forbikobler entry time
This function sets the time that the Forbikobler system
UK
allows for entry. An optional output for a door lock can be
connected during this time. To change the property of the
Forbikobler entry time:
1. On the control unit, enter:
2. The LCD display shows: 068: Door Tm=5
3. Via the keypad, select from the following items
and press:
0
1
2
3
4
5
6
7
8
9
4. Confirm your input. On the control unit, enter:
.
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
069 Forbikobler door lock
Proceed as follows to change the property of the
Forbikobler door lock:
1. On the control unit, enter:
068
Door Tm=5
2 seconds
Door Tm=3
3 seconds
Door Tm=4
4 seconds
Door Tm=5
5 seconds
Door Tm=10
10 seconds
Door Tm=20
20 seconds
Door Tm=30
30 seconds
Door Tm=60
60 seconds
Door Tm=120
120 seconds
Door Tm=255
255 seconds
069
2. The LCD display shows: 069: Lock Timed
3. Via the keypad, select from the following items
and press:
Lock Timed
The door lock controlled by the
0
Forbikobler system is only open for a
certain time during the reset.
Lock Toggled
The door lock controlled by the
1
Forbikobler system is open during the
reset.
4. Confirm your input. On the control unit, enter:
.
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
070 Entry/exit behaviour on internal active
(C)
To change the zone property of the entry/exit zone at
internal active (C):
1. On the control unit, enter:
2. The LCD display shows: 070: C=FE = FE
3. Via the keypad, select from the following items
and press:
C=FE = FE
A zone programmed as entry/exit keeps
this property even for internal activation
0
and thus starts the entry delay time
when the zone triggers and during
active internal activation.
C=FE = NA
A zone programmed as entry/exit
changes its zone property during
1
internal activation to immediate and
triggers an alarm if the zone triggers
and during active internal activation.
62
070