TR-Electronic CDH75M 8192/32768 EPN 20H7NT+FS-Serie Gesamt-Bedienungsanleitung Seite 152

Safety Program Creation - Configuration Example

Drag the power supply PS 307 2A in the catalog to position 1 of the rack with
SIMATIC 300 --> PS-300 --> PS 307 2A.

Drag CPU 317F-2 PN/DP in the catalog to position 2 of the rack with
SIMATIC 300 --> CPU-300 --> CPU 317F-2 PN/DP --> 6ES7 317-2FK13-
0AB0 --> V2.6. Also specify the characteristics of the Ethernet interface
here if necessary.

Drag digital output module SM 326F DO 10xDC24V/2A in the catalog to
position 4 of the rack with
SIMATIC 300 --> SM-300 --> DO-300 --> SM 326F DO 10xDC24V/2A
(6ES7 326-2BF01-0AB0).

Drag digital input module SM 326F DI 24xDC24V in the catalog to position 5 of
the rack with
SIMATIC
(6ES7 326-1BK01-0AB0).
The hardware components to be included in the rack are now complete.
The GSD file belonging to the measuring system must be installed in the next step.
This is copied with the belonging bitmap file into the installation directory of the
SIMATIC Manager. You should note that the directory structure can vary.
 TR-Electronic GmbH 2013, All Rights Reserved
Page 56 of 79
300 --> SM-300 --> DI-300 --> SM
TR - ECE - TI - DGB - 0233 - 03
326F DI 24xDC24V
Printed in the Federal Republic of Germany
07/15/2015