Putting A Digital Vehicle Into Operation - Faller 163701 Bedienungsanleitung

Putting a digital vehicle into operation

9. Putting a digital vehicle into operation
The vehicle can operate on any Car System roadway that has been built in
a workmanlike manner.
Check whether the vehicle functions properly.
X
Before putting the vehicle into operation for the first time, charge it
X
EN
completely.
TIP
To charge the batteries of your Car System Digital vehicles, use
exclusively the Processor-controlled charging unit, Art. 161349. For
further information on the topics "Charging batteries", please refer
to the instruction manual of the charging station.
Switch the vehicle on.
X
NOTE:
After the vehicle has been switched on, the additional functions that
ƒ
have been programmed will be activated one after the other, and the
vehicle will accelerate up to its normal speed.
If the vehicle is within the radio control area of a Car System Digital
ƒ
Master (Art. 161354), it will stand still immediately and log in accor-
dingly if you are using a personal computer running the "Car System
Digital" software.
134