Faller 163701 Bedienungsanleitung Seite 131

Fig. 48: View window "Conversion PCB"
DANGER
Severe injuries through burning or explosion of rechargeable batteries
Any erroneous entry regarding battery type or battery capacity may
damage the rechargeable batteries, trigger a fire or trigger the explosion
of the rechargeable batteries.
Check the type and capacity of the rechargeable batteries built into
X
your vehicle.
Under "Select vehicle" select the converted vehicle.
X
The converted vehicle introduces itself with the individual ID of your
conversion PCB in the system, e.g. "160011".
Under "Battery type" select the type of the built-in rechargeable bat-
X
teries.
- LIPO battery according to marking
- Select 1.2 V NiMH for 1 installed cell
- Select 2.4 V NiMH for 2 installed cells
Select under "Capacity" the value corresponding to the capacity of
X
the built-in rechargeable batteries.
Battery capacity is specified as a number in the type designation of the
batteries. For instance in the type designation CP300H, number 300
stands for a capacity of 300 mAh.
Complete the entry by clicking on "Programming".
X
The notice "Programs. Please wait" is displayed.
When programming has been completed, the notice "Programming
completed" is displayed.
Programming a digital vehicle
EN
131