Faller 163701 Bedienungsanleitung Seite 109

On the universal PCB detach both outgoing cables of the motor.
X
Leave unchanged both cables on the side that leads in the motor. Do
not damage both connecting cables of the motor.
Fig. 31: Lorry model with universal PCB, plugged batteries, without wiring
Using a modeller's knife cut, on the upper side of the universal PCB,
X
two of the strip conductors in accordance with
On the underside of the universal PCB bore through the strip conduc-
X
tors, using a rod-shaped mortiser, in accordance with
NOTE: For the exact measurements of the bores, refer to
Fig. 32: Cutting strip conductors on the universal PCB, plugged batteries
Converting the vehicle
Fig. 32.
Fig. 32.
Fig. 33.
EN
109