Bosch Rexroth PSI 6 C 761 Serie Typspezifische Anleitung Seite 61

R911337026 | PSI6xCx.761xx
Serial output field
Tab. 5:
Bits Outputs (status word)
1.00
Spot selection taken over
1.01 Not used
1.02
End of Sequence (EOS)
1.03
Timer ready
1.04
Weld fault
1.05
Fault reset of electric gun motor with reweld
1.06 Not used
1.07
UIR mode disabled
1.08
Firing enabled
1.09
With monitoring
1.10
Q Stop
1.11
Acknowledge end of component
1.12
UI Regulation active
1.13
UI monitoring active
1.14 Not used
1.15
Programmable Output
2.00
Electrode warning
2.01
Max. electrode life
2.02
Group Electrode warning
2.03
Acknowledge tip change detected
2.04
Group Tip dress warning, electrode
2.05
Start tip dress request electrode
2.06
Tip dress warning, electrode
2.07
Acknowledge tip dress detected
2.08
Tip Dress Cutter Warning
2.09
Tip Dress Cutter at End of Life
2.10
Acknowledge, tip dress cutter changed
2.11 Not used
2.12
Reference weld active
2.13
Tip dress / gun defective
2.14
Monitoring weld active
2.15 Not used
3.00 Dressing tool running 1
3.01
Dressing tool finished message 1
3.02
Error dressing tool 1
3.03 Not used
3.04 Not used
Bosch Rexroth AG 61/89