Customer And Vehicle Database; 43 9.2 Service Phases; 43 9.3 Manual Service; 43 9.3.2 Vacuum Phase - Bosch ACS 611 Originalbetriebsanleitung

en | 50 | ACS 611 | Operation
!
Follow the additional ACS 611 menu prompting.
1. Press <DATABASE>.
2. Select "USER SPECS" with o u and confirm with
.
E
3. Enter data with <A – Z>,<0 – 9> and confirm with
E.
i
<MENU> deletes character to left of cursor.
Navigate the cursor to the next line with E.
Navigate inside the window with o u, z or v.
9.1.3

Customer and vehicle database

i
In this menu, vehicle and customer data can be
included which are also then contained in the
printout.
!
Follow the additional ACS 611 menu prompting.
1. Call up the start screen.
2. Press <DATABASE>.
3. Select "VEHICLE DATAS" with o u and confirm
with E.
4. Enter data with <A – Z>,<0 – 9> and confirm with
E.
i
<MENU> deletes character to left of cursor.
i
Return with <Stop>.
9.2 Service phases
R
Recovery phase:
Refrigerant extracted from the vehicle, cleaned and
routed into the internal refrigerant cylinder.
R
Vacuum phase:
A vacuum is generated in the vehicle air conditioner
and the system is checked for leaks.
R
Filling phase:
$
Fresh oil: Fresh oil is added to the vehicle air
conditioner.
$
UV dye: UV dye is added to the vehicle air
conditioner.
$
Refrigerant: A certain quantity of R134a
refrigerant is added to the vehicle air
conditioner.
|
1 689 989 600 2020-12-01
9.3 Manual service
WARNING – Risk of frostbite from
escaping refrigerant
Refrigerant causes severe frostbite on the
skin.
¶
Check the service hoses for damage.
¶
Firmly connect the service quick-release
couplings to the service hoses.
¶
Wear safety goggles.
¶
Wear protective gloves.
!
The service parameters (vacuum generation time,
recharge quantity and oil type) can be found in the
owner's manual or the vehicle repair manual.
i
With the ACS 611 all service phases can be
performed manually.
i
Individual service phases are linked as standard
to other service phases as they are needed to fully
implement the individual operation selected.
i
R134a can only be added to an air conditioner
under vacuum. The vacuum phase must therefore
be implemented before filling with R134a.
i
Observe the vehicle-specific information before
altering the quantity of oil.
9.3.1 Recovery
i
During the recovery phase, ACS 611 automatically
empties the service hoses and separates the
extracted oil from the refrigerant which flows into
the used oil bottle.
i
The pressure in the vehicle air conditioning system
must be checked prior to and during the recovery
phase.
i
It is recommended to let the air conditioning
system run for a few minutes before the recovery.
This will allow a larger amount of refrigerant to
be extracted. Turn off the air conditioning system
before starting recovery.
Robert Bosch GmbH