Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning; Intensive Cleaning - Westfalia 34 19 41 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für 34 19 41:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

 If the atomisation is too coarse, increase the intake air pressure with the air
flow regulator (9). If the atomisation is too fine, reduce the intake air pres-
sure.
 Always keep the spray gun in a constant distance to the surface to be
sprayed.
 Always keep the hole on the lid of the paint container open during use.
7. Hold the spray gun vertically to the surface to be sprayed and move the spray
gun evenly and in parallel lanes from one side to the other.
8. Start spraying openings and corners of the object. If necessary, take a short
break after each spraying process, so the paint may evaporate. Each lane
should overlap to at least 50%. Move the gun evenly and always horizontal to
the object. Always work from top to bottom. Move the spray gun over the
edges of the object so that the edges get enough paint.
9. If you do not use the spray gun for a short time, hang it on the suspension eye
(8). Turn off the air supply and release the pressure. Close the drip stop (1).
10. Check the paintwork on all sides, before cleaning the spray gun. After work
empty the paint container into an appropriate bin. Properly dispose of coating
material that is no longer needed.
Recently treated surfaces must not be exposed to direct sunlight, to very high
or low temperatures, wind, dust, water or rain.

Cleaning

When using water-soluble coating material, simply
clean all parts of the air spray gun thoroughly with
water.

Intensive Cleaning

 Please note that disassembling and intensive
cleaning of the spray gun are inevitable, as other-
wise it can lead to debris and to a bad spray result, if
lacquer and priming coats are used as coating
material.
 Clean the spray gun and the paint container after
each use with appropriate paint thinners or cleaning
agents. Empty the contents. Fill a little paint thinner
into the paint container and rinse it. Empty the paint
container and repeat the process with clean paint
thinner. Spray the clean paint thinner in short
strokes.
Using
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis