Werbung
Verfügbare Sprachen
Verfügbare Sprachen
˜ Cleaning and maintenance
m
WARNING!
Maintenance and cleaning work must
u
always be carried out with the motor
switched off and the battery removed .
Risk of injury!
Have any repair and maintenance work
u
that is not described in this user manual
carried out by our specialist workshop .
Only use original spare parts . Allow the
u
product to cool off before undertaking
any maintenance or cleaning work . There
is a danger of burns!
Use cut-protection gloves when handling
u
the chain or the chain bar . Risk of cuts!
Switch off the product and remove
u
the battery before carrying out any
maintenance work .
˜ Cleaning
Clean the machine thoroughly after every
use . In this way, you extend the life of the
machine and avoid accidents .
Keep the gripping handles free of petrol,
oil or grease . Clean the gripping handles,
where appropriate, with a moist cloth
soaked in soap . Use no solvents or petrol
for cleaning!
Clean the saw chain after every use . Use a
paint brush or wipe for that . Do not use any
liquids to clean the chain . After cleaning, oil
the chain lightly with chain oil .
Clean the ventilation slots and the surfaces
of the machine with a paint brush, whisk
or dry cloth . Do not use any liquids for
cleaning .
434668_2304_CZ_SK_HU_SI_02.indb 21
434668_2304_CZ_SK_HU_SI_02.indb 21
˜ Saw chain oiling
m
CAUTION!
Clean and oil the chain regularly . This
u
keeps the chain sharp and achieves
optimum machine performance . Damage
due to insufficient maintenance of the
saw chain will invalidate the warranty .
Remove the battery and use cut-resistant
gloves when working with the chain or
with the blade bar .
The blade bar and chain must never
u
be operated without oil . If the cordless
pruning saw is used with too little oil,
the cutting performance and lifespan of
the saw chain will decrease as the chain
will become blunt more quickly . You can
identify when there is too little oil if smoke
develops or the blade bar changes
colour .
m
WARNING!
Switch off the product and remove
u
the battery before carrying out any
maintenance work .
Oil the chain after cleaning, after 10 hours
of use or at least once a week, whichever
comes first .
Before oiling, the blade bar, especially the
teeth of the blade bar, must be thoroughly
cleaned . Use a hand brush and a dry cloth
for this purpose .
Oil the individual chain links using an oil
syringe with a needle tip (available from
specialist dealers) . Apply individual drops
of oil on the joints and on the tooth tips of
the individual chain links .
˜ Maintenance intervals
Regularly carry out the maintenance operations
listed in the following table . The life of the saw
is extended by regular maintenance of your
chainsaw . Furthermore, you get optimum cutting
performance and avoid accidents .
GB
21
11/3/2023 12:17:24 PM
11/3/2023 12:17:24 PM
Werbung
