Parkside PGHSA 20-LI B1 Bedienungsanleitung Seite 11

Service
Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the power
tool is maintained .
Never service damaged battery
packs. Service of battery packs should be
only be performed by the manufactured or
authorized service providers .
˜ Special safety directions for
pruning saw
Keep all parts of the body away
from the saw chain when the chain
saw is operating. Before you start
the chain saw, make sure the saw
chain is not contacting anything. A
moment of inattention while operating chain
saws may cause entanglement of your
clothing or body with the saw chain .
Always hold the chain saw with
your right hand on the rear handle
and your left hand on the front
handle. Holding the chain saw with a
reversed hand configuration increases the
risk of personal injury and should never be
done .
Wear safety glasses and hearing
protection. Further protective
equipment for head, hands, legs
and feet is recommended. Adequate
protective clothing will reduce personal
injury by flying debris or accidental contact
with the saw chain .
Do not operate a chain saw in a
tree. Operation of a chain saw while up in
a tree may result in personal injury .
Always keep proper footing and
operate the chain saw only when
standing on fixed, secure and level
surface. Slippery or unstable surfaces
such as ladders may cause a loss of
balance or control of the chain saw .
434668_2304_CZ_SK_HU_SI_02.indb 13 434668_2304_CZ_SK_HU_SI_02.indb 13
When cutting a limb that is under
tension be alert for spring back.
When the tension in the wood fibres is
released the spring loaded limb may strike
the operator and/or throw the chain saw
out of control .
Use extreme caution when cutting
brush and saplings. The slender
material may catch the saw chain and
be whipped toward you or pull you off
balance .
Carry the chain saw by the
front handle with the chain saw
switched off and away from
your body. When transporting or
storing the chain saw always fit
the guide bar cover. Proper handling
of the chain saw will reduce the likelihood
of accidental contact with the moving saw
chain .
Follow instructions for lubricating,
chain tensioning and changing
accessories. Improperly tensioned
or lubricated chain may either break or
increase the chance for kickback .
Keep handles dry, clean, and free
from oil and grease. Greasy, oily
handles are slippery causing loss of control .
Cut wood only. Do not use chain
saw for purposes not intended.
For example: do not use chain saw
for cutting plastic, masonry or
non-wood building materials. Use
of the chain saw for operations different
than intended could result in a hazardous
situation .
Hold the power tool by insulated
gripping surfaces only, because
the saw chain may contact hidden
wiring. Saw chains contacting a "live"
wire may make exposed metal parts of
the power tool "live" and could give the
operator an electric shock .
GB 13
11/3/2023 12:17:24 PM 11/3/2023 12:17:24 PM