Herunterladen Diese Seite drucken

Grundig GO 15 Z Bedienungsanleitung Seite 29

Werbung

7.9
Darstellung von Kennlinien
im X/Y-Betrieb ist das Schreiben von Kennlinien méglich.
Der X-Ablenkung (Buchse
,Schaiter QQ) aut
"Ext, X"' wird das als Absziss€ gewlinschte Signal zugefihrt,
wahrend in Y-Richtung (Buchse
) die andere Korm-
ponente der Kennliniendarsteilung
dagebildet wird.
Besonders giinstig wirkt sich hierbei aus, da& durch den
"Ext. X via Yy"-Betrieb der Ablenkkoeffizient der X-Achse
im gleichen Umfang verandert werden kann wie bei der
Y-Achse.
Beispiel 1:
Die Aufnahme einer Varistor-Kennlinie
7.9
Display of Characteristics
Display of characteristics is possible at X/Y-operation.
(socket
_ switch
set to "Ext.—X"") while the
other component of the characteristic display is shown in
Y-direction (socket
€4)).
The margin as abscissa is applied to the X-deflection
it works out very well that, due to the "Ext.X via Yg"
operation, the deflection coefficient of the X-axis can be
changed in the same range as for the Y-axis.
Example 1:
Recording of a varistor characteristic
Abb, 21
Fig. 21
Beispiel 2:
Example 2:
Die Aufnahme einer Z-Dioden-Kennlinie
Recording of a Zener diode
U,
Qo
Abb. 22
zd
Fig. 22
-29-—

Werbung

loading