Herunterladen Diese Seite drucken

Grundig VG1000 Bedienungsanleitung Seite 8

Werbung

Hohe ein
Gitterfeld:
Bildschirm-
begrenzung:
Kreissignal:
Gelb/Rot/Gelb-Sprung
Phasenlage und Amplitudenverhdltnisse
der Farben wie beim Farbbalken.
rechts und links wird jedes 2. Gitterfeld
in vertikaler Richtung wei8 getastet.
In jedes Testbild auBer Multiburst ein-
blendbar.
Kreiselemente abgespeichert in Fest-
wertspeicher, deshalb keine Anderung
des Durchmessers mit der Temperatur.
Amplitude:
700 mV
vertikaler Durch-
messer:
256 Zeilen
Halbwertbreite der
Kreislinie in Bildmitte: 200 ns
2.4.2 Uber den gesamten Bildschirm darstelibare
Testsignale:
Gitterraster:
Vektor-
testbild:
19 senkrechte und 15 waagrechte
Linien. Tech. Daten siehe Testbild.
Sagezahn mit + BAy — modulierter
Farbtragerkomponente
Leuchtdichtesignal sagezahnformig links
mit 0 beginnend bis zum Maximalwert von
37,5% des WeiBwertes steigend.
Uberlagert
ist ein
Farbtrager,
dessen
Amplitude an jeder Stelle des Sagezahns
ebenso groB ist, wie das Leuchtdichte-
signal.
Phasenlage:
+ 90°/- 90° + 2°
alternierend von Zeile zu Zeile
Sagezahn mit + BAy — modulierter Farb-
tragerkomponente.
Wie Sagezahn mit + BAy — moduliertem
Trager, jedoch Phasenlage 0° + 2°
G - Y Vektor:
Vektor mit
Phasenlage:
146°+ 3°
Leuchtdichte:
263 mV +1,5% *
Farbamplitude:
Usg = 700 mV + 5%
Unbuntfeld mit + BAy — Vektor
Technische Daten siehe Testbild
Unbuntfeld mit + BAy — Vektor
Technische Daten siehe Testbild
Height of a
grid field:
Screen
limitation:
Circular
signal:
Yellow/red/yellow/jump
Phase position and amplitude ratios
of the colors as for the color bars.
Every 2nd grid field is white-blanked
in the vertical direction right and left.
Superimposable in every pattern except
the multiburst.
Circle elements stored in the fixed-value
memory; thus, no change in diameter
with temperature.
Amplitude:
700 mV
Vertical diameter:
256 lines
Half-band width of the circular line in the
picture center:
200 nsec
2.4.2 Test signals displayable over the entire screen:
Grid lattice:
Vector test
pattern:
19 vertical and 15 horizontal lines.
See the test pattern for technical data.
Sawtooth with +BAy — modulated
chroma component
Luminance
signal
sawtooth-shaped,
starting with O on the left and increas-
ing to the maximum of 37.5% of the white
value
A
chroma
carrier
is superimposed;
its amplitude is the same
at every part
of the sawtooth as the luminance signal.
Phase position:
+90°/-90° +2°
Alternating from one line to the other
Sawtooth with +BAy — modulated
chroma component.
Same as the sawtooth with +BAy —
modulated carrier, except that the
phase position is 0° +2°
G ~ Y vector:
Vector with phase
position:
146° 43°
Luminance:
263 mV +1,5% *
Chroma amplitude:
Vp) = 700mV +5%
Achromatic field with +BAy vector
See the test pattern for technical data
Achromatic field with +BAy vector
3
See the test pattern for technical data
|
|

Werbung

loading