Grundig GIEI 638980 INH Bedienungsanleitung Seite 24

Keep the surface of the touch con-
trol panel clean. It may give erro-
neous operation warning.
No pots/pans must be placed on
the touch control panel.
Operating Hood and Hob as connected
(Hob to Hood) (It varies depending on the
product model. It may not be available
on your product.)
If your product has "
product has the ability to operate in con-
junction with the hood. You can connect
your hob and hood via this feature allowing
your hood to operate automatically by ad-
justing the extraction level for optimum per-
formance according to the set heating level
of your hob. In order to do this you must
first connect your hood and hob to each
other, once this is done you can activate
the connection on the hob allowing the hob
and hood to work together.
Matching the hob and hood to one another
The process of connecting hob and hood is
required only once. To connect the hob and
the hood, simply activate the connection
via the hob after the initial connection has
been achieved.
1. To turn on the hob, touch the "
2. Touch the " " key for 3 seconds ap-
proximately.
ð "
" symbol flashes on the display.
3. Activate matching to the hob on your
hood (see the hood manual) and the
corresponding symbol on the hood will
start to flash.
ð When the matching is complete, the
" " symbol on the hob and the corres-
ponding symbol on the hood con-
stantly appear.
Activating the connected operation of the
hob and the hood
1. To turn on the hob, touch the "
" symbol, your
" key.
" key.
EN / 24
2. Touch the " " on the hob.
3. When activation is complete, the corres-
ponding symbol in the hood and the "
symbol on the hob will appear continu-
ously.
ð Depending on the total temperature
level of your hob, your hood will auto-
matically run, increase or decrease the
level.
Using the "HomeWhiz" application
ü If your product has "
can control your hob via tablet/phone.
Follow the steps below to control and
track your hob via your tablet/phone.
You need to connect your tablet/phone
to your home network and download
the "HomeWhiz" application onto your
tablet/phone from the application store
of your smart device.
1. Start the app you've downloaded on
your tablet/phone.
2. Touch "Add/remove product" on the tab-
let/phone.
3. Select the " " model from the options
on the application.
4. Follow the instructions on the tablet/
phone to complete the setup.
5. Press and hold the "
seconds and then release it. On the
screen, " " symbol will blink. During
this time, you can connect to your smart
device.
6. Connect to your hob, using the name
and the password in the application
through the settings of your tablet/
phone.
7. Select the network you are using in the
network list and connect your hob to the
network with the required password.
When the setup is complete, "
flash continuously on the display. You
can start to use your hob after giving it a
name in the "Add/remove product" sec-
tion in your app.
EN
"
" symbol, you
" key for 3
" will
DE
IT