Inspection And Maintenance - Varex Imaging XRpad2 HWC-M Digital X-ray Bedienungsanleitung

XRpad2 HWC-M Detectors User Manual
19.0

Inspection and Maintenance

WARNING
Caution
It is important that the X-ray detector is used safely and as intended. Inspect the detector and its
accessories before use. If any problem is found during the inspection, correct the problem, and
take the measures indicated in this section. The X-ray detector and the XRpad Interface and
Power Unit do not have any internal exchangeable parts. Only the accessories listed in
can be changed after consulting with your establishment's safety representative. If the problem
cannot be corrected, contact your dealer, distributor, device manufacturer, or any Varex Imaging
subsidiaries (regional service headquarters) listed on the last page of this document.
Beside the described inspections no additional maintenance is required in regard to
electromagnetic disturbance and basic safety during the expected service life.
We recommend that records of the inspection be kept close to the detector. You can use copies of
the checklist in this section, or you can make your own copies of the checklist.
The X-ray detector must be repaired by Varex Imaging authorized
personnel only. Ignoring this warning may result in explosion, fire,
electric shock, or unknown hazards, which may result in severe
personal injury, death, or substantial product damage.
Inspect the X-ray detector before use. In addition, carry out prescribed,
regular inspections per the instructions in this manual.
www.vareximaging.com
Inspection and Maintenance
Table 10
61