76
Explanation for Columns 3..5 of the table:
HBM
PW: Password protection
−
no password required
1
Enable through command DPW / SPW
2
Setting only with special password (allocated by HBM)
3
Extent of the storage depends upon whether password is set.
Check: Influence on the calibration counter
−
Command does not increment the calibration counter
4
Command increments the calibration counter, if legal−for−trade set
5
Command increments the calibration counter, if legal−for−trade set and password is set
EEPROM: Non−volatile storage
−
No storage
6
Storage automatically after command execution
7
Only after execution of TDD1
Scale electronic unit (NSW)
WE2108