Balluff BVS ID-M1280-F1-Serie Konfigurationsanleitung Seite 256

BVS ID-M1280xF1-xx-xxx
Structure protocol byte 0 (BVS ID → PLC) State Bytes
Name
OK
OK Inspection ID
OK Results
OK Date Time
NOK Error
NOK Communication Abort
NOK Invalid Command
NOK Results
NOK Busy
NOK Inspection Error
• Positive results (OK ....) are signalled with the Job End bit during the handshake.
• Negative results (NOK ...) are signalled with the Job Error bit during the handshake.
• Negative results (NOK...) have no payload and always a length of 0.
82 english
Status code Meaning
00 Command was successfully executed.
hex
02 Response to the command Get Inspection ID;
hex
transfer of
03 Response to the command Get Results; transfer
hex
of results.
06 Response to the command Get Date Time;
hex
transfer of timestamp.
10 An error occurred during the last transfer of a
hex
command.
11 Communication was canceled by the PLC by
hex
resetting the Job bit.
13 An invalid command code was transferred.
hex
15 Response to the command Get Results; no
hex
results present.
16 Command could not be executed since the
hex
camera is still processing another command or
is not yet ready after a restart.
1A An error occured while loading the inspection
hex
program.
the inspection ID.