Balluff BVS ID-M1280-F1-Serie Konfigurationsanleitung Seite 227

BVS ID-M1280xF1-xx-xxx
Disconnect
With the Disconnect message the connection will be disconnected. Afterwards, no more result containers or
status messages will be transmitted; messages to BVS ID will be ignored.
Length in bytes
2
2
Example:
Message from the client to BVS ID: 02 00 00 00
Reset errors
The error bits Input Data Error, Report Error and Trigger Overflow within the status word are set to binary "1"
once the error occurs for the first time. It sticks to this value until it is reset to binary "0" with this message.
Länge in Bytes
2
2
BVS ID answers with a "Reset errors" response:
Length in bytes
2
2
2
BVS ID answers with a status message in which all three error bits are binary "0". This answer with a status
message is even sent if all error bits were already binary "0" before resetting them. The answer is sent
independent of the option "Send status information automatically".

NOTE
The error bit System Error remains binary "1" as long as the system error is present. It is automatically
reset to binary "0" once the system error is resolved. This error bit is thus unaffected by the command
"Reset errors".
Example:
The last status message from BVS ID to the client was: 12 00 02 00 20 01
The status word 20 01 can be interpreted as: 0b 0010 0000 0000 0001. The 5th of the low byte and the 0th bit
of the high byte are binary "1".
Therefore, the status message indicates Ready and Trigger Error.
Message from the client to BVS ID: 16 00 00 00
BVS ID answers with:
16 00 02 00 00 00 (Reset errors response message)
12 00 02 00 20 00 (Status message)
Structure
UINT16
UINT16
Structure
UINT16
UINT16
Structure Value
UINT16 16
UINT16 02
UINT16
Value Description
02 Message ID
hex
00 User data length in bytes
hex
Wert Bezeichnung
16 Message ID
hex
00 User data length in bytes
hex
Description
Message ID
hex
User data length in bytes
hex
Result code
english 53