Replacing The Spatter Protection; Replacing The Z Axis/Bellows - Abicor Binzel ABIBUG 300 Originalbetriebsanleitung

ABIBUG 300

9.6 Replacing the spatter protection

Required tool:

9.7 Replacing the Z axis/bellows

Required tool:
9 Maintenance and cleaning
— AF10 fork wrench
Rotate the device to the service position.
1
Loosen and remove the screws (2× M6) using
2
the fork wrench (AF10).
Remove the spatter protection.
3
Insert the new spatter protection and mount
4
again in reverse order.
— AF2.5/3/3.5 Allen key
— Cotter pin drive size 2.8
— AF10 fork wrench
Rotate the device to the service position.
1
Loosen and remove the screws (2× M6) using
2
the fork wrench (AF10).
EN - 51