Changing The Position Using The Quick-Return Button - Abicor Binzel ABIBUG 300 Originalbetriebsanleitung

7 Operation

7.4 Changing the position using the quick-return button

Risk of injury due to uncontrolled movement
The device will begin to move as soon as the quick-release button is pressed. There is a risk of injuries.
► Only press the quick-return button when you are holding onto the retaining frame of the device.
► Only select one quick-return button with your thumb. With the left hand, press the right quick-return
EN - 42
CAUTION
button and with the right hand, press the left quick-return button.
Switch on the device at the On/Off switch.
1
The LED illuminates.
Check the LED status indication. The LED will
2
illuminate green.
 7.2.2 LED status indications on page EN-45
Hold on to the device at the retaining frame,
3
then press and hold a quick-return button.
Move the device on the positioning belt to the
4
desired position.
Release the quick-return button.
5
Check that the seating is secure by making short
6
forward and backward movements.
ABIBUG 300