Eu Declaration Of Conformity; Responsibilities Of The User - Abicor Binzel AUT 61GD Betriebsanleitung

MAG welding torches
1 Identification

1.1 EU Declaration of Conformity

Designation
Relevant EC Directives
Harmonized standard applied
EU Declaration of Conformity
Tab. 1

1.2 Responsibilities of the User

2 Product Description
2.1 Designated Use
The MAG welding torch is used in industry and in the trade for welding using
active gases (MAG). It is available as machine-operated torches and can be
used in all welding positions. Depending on the model, they are air- or liquid-
cooled. The liquid-cooled model requires a re-circulating cooling unit. These
operating instructions describe MAG welding torches AUT 61GD, AUT 610D.
The MAG welding torches may only be operated using original
ABICOR BINZEL spare parts.
according to EC Low Voltage Directive 2006/95/EC, Annex III.
We, Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker 7-9, 35418 Alten-Buseck
hereby declare that, on the basis of their design and construction, the MAG
welding torches described in these operating instructions comply with the basic
safety and health requirements of the EC directive. Any modification not
agreed with us will void this declaration.
MAG welding torches AUT 61GD, AUT 610D
EC Low Voltage Directive 2006/95/EC
EN 60 974-7
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Job
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torches in connection with
welding units comply with the EC EMC Directive (04/108/EC) and that the
signal utilisation of the integrated welding current monitoring against stray
currents is installed properly.
MAG welding torches are preferably used for welding of filler wires in
machine. Designated use also includes the observance of the prescribed
operating, maintenance and servicing conditions.
1 Identification
EN - 3