Intended Use; Misuse; General Safety Provisions - Samson 327 Originalbetriebsanleitung

Translation of the original operating instructions
Type 327
2.3.

Intended use

The diaphragm valve type 327 is designed for the installation in pipelines and is used to control and regulate
media.
Only expose the device to media to which the body and seals are resistant. Intended use also includes
compliance with the installation and maintenance conditions specified by the manufacturer as well as the
general rules of technology. Any other use is considered improper. The manufacturer is not liable for any
damage resulting from this; the user bears the risk.
Warning
The relevant and generally accepted safety rules apply when planning the operation, as well as operating the
device. Appropriate measures must be taken to prevent unintentional actuation or undue impairment. Please
note that planners, plant builders or operators are generally responsible for the positioning and installation of
the electrical position indicators.
2.4.

Misuse

▪
Do not supply the system with flammable or aggressive medias.
▪
Do not apply mechanical loads on the housing (e.g. positioning of objects on the device, using it as a
step).
▪
Do not carry out any external modifications on the housings of devices. Do not paint any parts of the
housing.
▪
Use the device only with components or spare parts, which are approved from SED Flow Control
GmbH.
▪
The standard version of the Seat valve must not be used in potentially explosive areas. For this
purpose, please use the suitable version and use it only in approved regions!
2.5.

General safety provisions

▪
The operating instructions by the manufacturer are binding for installation, programming,
maintenance and transport.
It is the operator's responsibility to complement the safety provisions by special instructions specific
▪
for local operating conditions, if required.
▪
The operating instructions and all safety-relevant rules and regulations must be kept in a safe place.
▪
The operating instructions and safety information must be available in full and in easily legible
condition.
© 1994 - 2022 SED Flow Control 38 BA220002 Version: a