Loewe SL7 Erweiterte Bedienhinweise Seite 60

Loewe bild | Extended operating instructions

Setup
[Headphone only] – The TV speakers are disabled when headphone is connected.
[Headphone with speakers] – Both the TV speakers and headphones outputs sound.
[Headphone Volume] – Menu to change the headphone volume. In [Headphone only] mode, you can change the headphone volume directly
using the volume buttons on the remote control. In [Headphone with speakers] mode, the headphone volume can be changed from this
menu, while the volume of the TV speakers is controlled using the volume buttons on the remote control.
Tip: When headphones are connected, you can change headphone volume by pressing the
volume] from the quick menu.
Meaning of the LED colours
Under the screen is a small LED that gives you basic information about the status of the TV.
LED colour
White
Green
Blue
Blue
Red
External 4k players
You have the option of connecting 4k-capable external players such as Blu-Ray players or streaming boxes from various providers to your Loewe
TV.
It is important to note that configurations should be made in the control menus of the external players to ensure optimum picture reproduction
on the TV.
Each manufacturer uses its own nomenclature here. Make sure not to set a fixed frame rate / refresh rate / video resolution in the settings of
the external player. Ideally, these criteria should be set automatically (see example picture). It is important that the settings for frame rate and, if
necessary, dynamic range are adapted to the source material / native material.
.
Note: Picture shows menu of an external 4k player (exemplary)
60
TV status
Standby mode.
Switched on.
TV is on with screen off.
Automatic calibration of the OLED panel during standby mode.
Recording active.
(menu) button and selecting [Headphone