Changing The High And Low Beam Bulbs - Ducati MULTISTRADA 1000DS S 2006 Anleitung- Und Instandhaltungsheft

Changing the high and low beam bulbs

Before replacing a burnt-out bulb, make sure that the new
one complies with voltage and wattage as specified in the
"Electrical System" paragraph in page 93. Always check
that the new bulb works before refitting removed parts.
Figure 56 shows the position of the low beam (LO),
high beam (HI) and parking light (1) bulbs.
E
To access the headlight bulbs, release the top and bottom
springs (2) under the instrument panel at the side of the
fixed fairing (fig. 57), and open the shell (3).
Notes
For the sake of clarity the headlight is shown
disassembled from the vehicle.
70
1
2
3
fig. 57
LO
HI
fig. 56
2 3
3 2