Ducati MULTISTRADA 1000DS S 2006 Anleitung- Und Instandhaltungsheft Seite 144

1000DS
STANDARD rebound damping setting (1):
turn the adjuster all the way in (clockwise), then slacken by
2 turns.
STANDARD setting of adjuster (2): turn the adjuster all the
way in (clockwise), then slacken by 2 turns.
The preload on the external spring of the shock absorber
can be adjusted using the adjusting knob (3) on the right of
the frame, and following the values shown on the knob
itself.
The STANDARD setting is when the adjusting knob is in
the minimum (LOW) position.
STANDARD length of the preloaded spring on the shock
absorber: 165 mm.
Warning
The shock absorber is filled with gas under pressure
and may cause severe damage if taken apart by unskilled
persons.
S S
H H
1
1000DS
3
1000DS
H S
S H
2
fig. 35.1
HIGH HIGH
LOW LOW
fig. 35.2
45
E