VOLTCRAFT Energy Control 3000 USB Bedienungsanleitung Seite 50

e) Select Consumption Value (Average / Peak Value)
• In the display area that is active at the moment (see b), you can call up the individual
consumption values in the following sequence by briefly pressing the T3 button:
Display sequence for consumption and peak consumption
No. Designation
1 Consumption – average of last interval
2 Consumption – average of last hour
3 Consumption – average of last day
4 Consumption – average of last week
5 Consumption – average of last month
6 Consumption – average of last year
7 Consumption – average since reset
8 Peak consumption – last interval
9 Peak consumption – last hour
10 Peak consumption – last day
11 Peak consumption – last week
12 Peak consumption – last month
13 Peak consumption – max value since reset
• If "Max" is displayed instead of "ø", the corresponding peak values of the past time period
are shown (here, "year" is left out).
In addition, 3 seconds after letting go of the button, the time when the peak value occurred
is displayed in the sequence of "time, date" (without year).
Afterwards the display returns to the peak value.
• In the display, the value that was selected last remains visible.
• The relevant unit blinks until another button is pressed or 10 seconds have elapsed without
pressing a button.
50
Active segments
"Value" + kW + ø
"Value" + kW + ø + h
"Value" + kW + ø + d
"Value" + kW + ø + w
"Value" + kW + ø + m
"Value" + kW + ø + y
"Value" + kW + ø + Σ
"Value" + kW + Max
"Value" + kW + Max + h
"Value" + kW + Max + d
"Value" + kW + Max + w
"Value" + kW + Max + m
"Value" + kW + Max + Σ