Werbung
Verfügbare Sprachen
Verfügbare Sprachen
中文
EN
DE
RU
KO
PT
JA
ES
AE1031H
1. Insert the USB key with the updated software into the USB port of the
S 1000 and wait 10 seconds.
2. Select UPDATE TPMS then press the confirm but-ton
(Fig.
36h).
The message in Fig. 36i is displayed.
.If the update does not start after 10 attempts, an error message is
displayed (Fig. 36l).
Press the confirm key
to go back to the
previous screen, then repeat the steps from point 1.
.If the update starts, the installation progress of the new file is
displayed (Fig. 36m).
.If the installation procedure is interrupted, the message shown in Fig.
36n is displayed
In this case, press the confirm key
to go back to the previous
screen, then repeat the steps from point 2.
.If the system cannot read the USB key, the mes.sage in Fig. 36o is
displayed.
Press the confirm key
to go back to the previous screen, then
repeat the steps from point 1.
3. Once installation is complete, the message in
Fig. 36p is displayed.
4. Remove the USB key.
141
Werbung
Kapitel
Fehlerbehebung
