Returns To Ecolab Engineering Gmbh; Storage - ECOLAB Versatronic Betriebsanleitung

1.8

Returns to Ecolab Engineering GmbH

The return must be requested "online":
https://www.ecolab-engineering.de/de/kontakt/ruecksendung.html. Fill
in all the details and follow the navigation.
The following documents must be completed:
– Returns form
– Request the form from Ecolab.
– Fill out the form correctly and in full.
– Fill out the clearance declaration.
– Send both in advance by fax to: (+49 8662 61-258)
– System components:
– Free of all impurities (flushed).
– Must be dispatched in suitable plastic packaging and in a box in
– Cartons:
– Addressed to (see):
– The word "REPAIR" must be written on a sticker or in clear
– Include a returns form.
1.9

Storage

Under certain circumstances, instructions for storage, which go beyond the
requirements listed here, can be found on the package.
These must be observed accordingly.
Please note the following storage conditions:
n Do not store outdoors.
n Store in a dry and dust-free place.
n Do not expose to aggressive media.
n Protect from sunlight.
n Avoid mechanical vibrations.
n Storage temperature and relative humidity:
Follow the information in section "Technical data".
n For storage periods of more than 3 months, check the general condition of all parts
and packaging regularly.
If necessary, refresh or renew the preservative.
order to avoid any leakage of flushing water.
Ä Chapter 1.13.2 'Technical support contact' on page 17.
handwriting.
15
General information
417102269 Rev. 2-08.2020