Routing The Aux Output Using An Atem Hardware Panel - Blackmagic Design ATEM Live Installations- Und Bedienungsanleitung

The ATEM Production Studio 4K models feature illuminated buttons on the front panel together
with a built in LCD screen. Assigning an aux output is as easy as selecting an aux button from
the right hand row and pressing one of the source buttons on the left. The LCD screen will then
display that output. This feature not only gives you a fast visual indicator of your connections,
but also serves as a powerful auxiliary switcher!
Auxiliary Outputs Control Menus on Mac
Auxiliary Outputs Control Menus on Windows
ATEM Software Control menus for routing outputs for ATEM Constellation 8K.

Routing the Aux Output using an ATEM Hardware Panel

On ATEM hardware panels, you can route the auxiliary output using the auxiliary settings in the
system control menu. To do this:
1 Press the 'aux' button in the system control 'home' menu to open the auxiliary menu.
2
In the auxiliary menu, select auxiliary 1.
3 Press a source button on the corresponding M/E's source select row. Depending on
the panel you are using, you may need to hold the shift button down to access your
desired source.
4 Press the 'home' system control button to return to the home menu.
Using Auxiliary Outputs 154