Adjusting Grinding Process; Degrees Settings; Handwheel - HOLZMANN-MASCHINEN UWS 3 Betriebsanleitung

10.3.2 Adjusting grinding process

Loosen the locking screw (4) and determine in accordance with the set screw (3) the grinding
wheel.
With the fine adjustment screw (13) the guide shaft is rotated radially.

10.3.3 Degrees settings

The angle scale can be adjusted by loosening the clamping screw.
The locking lever (9) has the following functions.
 right: it can engage in the 15° angle.
 center: angle of 180° can be snapped.
 left: the handwheel can be turned indefinitely.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
4
13
Scale
pinch wheel

Handwheel

OPERATION
9
21
UWS 3