Throttle Control - Husqvarna TE 250 2008-I.E. Merkmale, Gebrauch, Wartung

Cap4_GB 9-07-2007 16:23

THROTTLE CONTROL

The throttle knob (1), is located on the right hand side of the
handlebar. The position of the throttle control can be adjusted
by loosening the two fastenig screws .
CAUTION
Do not forget to tighten the screws (A) after
the adjustment.
FRONT BRAKE CONTROL
The brake control lever (2) is located on the right hand side of
the handlebar. The position of the throttle control can be ad-
justed by loosening the two fastenig screws .
CAUTION
Do not forget to tighten the screws (B) after
the adjustment.
20
Pagina 20
STEERING LOCK (TE-SMR)
The motorcycle is equipped with a steering lock (1) on the R.H.
side of the steering head tube.
To lock it, procede as follows:
turn the handlebar leftwards, place the key in lock and turn
counterclockwise. Push the key inwards (if necessary, turn to
and from). Turn the key clockwise and remove it from the lock.
To unlock the steering lock, reverse the above procedure.