Werbung
POWR
INTERMEDIATE HOUSING
Oil seal installation
1. Install:
Oil seal [8 mm (0.31 in)]
Driver rod:
YB-06071/90890-06606
Bearing outer race attachment:
YB-06016/90890-06626
NOTE:
Before installing the oil seal, lubricate the
clip groove with water resistant grease.
Distance a:
6.8 ~ 7.2 mm (0.27 ~ 0.28 in)
2. Install:
Driven coupling shaft
Distance a:
9.5 ~ 10.5 mm (0.37 ~ 0.41 in)
NOTE:
Support the bearing housing with steel
blocks 1 and press the driven coupling
shaft.
3. Install:
Oil seal 1 [8 mm (0.31 in)]
Oil seal 2 [10 mm (0.39 in)]
Distance a:
10.3 ~ 10.7 mm (0.41 ~ 0.42 in)
Distance b:
1.6 ~ 2.0 mm (0.06 ~ 0.08 in)
5-43
E
Werbung
Kapitel
