Part Names Of Lens Mount - NEC NP-02HD Installationsanleitung

This chapter illustrates the factory default settings.

2-7-1. Part names of Lens Mount

Release lever
1
Remove the lens cover.
For removing the lens cover, refer to "1-5-1. Removing and Mounting the Lens Cover" on page 51.
2
Remove the lens mount cap.
(1) Rotate the release lever clockwise in the upward
direction.
The lens stopper will be released.
(2) Rotate the lens mount cap counterclockwise
and remove it.
Keep the lens mount cap in a safe place for later
use.
3
Remove the lens cap from the rear end
of the lens unit.
Keep the lens cap in a safe place for later use.
Lens unit fall prevention metal fitting
Lens stopper
Setting Up Your Projector
Lens control connector
Lens mount cap
（1）
（2）
95