Version; Ip Address - NEC NP-02HD Installationsanleitung

4-5-6. Version

Displays the version information about the projector, optional boards and IMB.
System
Displays the version information of the projector.
Display items are as follows.
・Model
・Serial No.
・Release Package
・Kernel
・U-Boot
・System Files
・CinemaFirmware
・Cinema Data
・ICP Firmware
・ICP ConfigFile
・FMT FPGA
・Secure Processor
・Slave BIOS
IMB
Displays the vendor name and version information about the media block (IMB). When the projector is in standby mode, the vendor
name is blank and the version information displays "---". Displays "Not Use" when IMB is not mounted to the projector.
* When the NP-90MS01/NP-90MS02 is mounted, the vendor name displays "IMS".

4-5-7. IP Address

Displays the IP address set in the projector.
System
← Selects the item to display.
← Displays the version information.
・Slave Firmware
・Opt MCUFirmware
・LD Interface
・LD Driver1
・LD Driver2
・LD Driver3
・LD Driver4
・LD Driver5
・LD Driver6
・LD Driver7
・LD Driver8
・Lens Firmware
← Displays the vendor name.
← Displays the version information.
← Displays the IP address.
Displays the IP address set for the projector (System).
LCD Menu
137