NEC NP-02HD Installationsanleitung Seite 117

3 Mount the top panel.
(1) Turn off all power to the projector and shut off
the AC power supply.
(2) Close the rubber seals that were opened.
(3) Put the FMT board back in its original position
and attach the four M3 screws.
(4) Fix the FMT board's cables to their original posi-
tions with the clampers.
(5) Remove the left and right side panels.
(→ page 53)
(6) After mounting the top panel, mount the left and
right side panels.
Refer to "2. Installation of the light module" step
8 (3) and (4) (→ page 34) and step 9 (→ page
35).
This completes the CG adjustments.
Projector Adjustment and Connecting
117