Making Audio Player Settings - Roland Lucina AX-09 Bedienungsanleitung

Audio files that can be played
MP3
Format
MPEG-1 audio layer 3
Sampling.
44.1 kHz
Frequency
32/40/48/56/64/80/96/112/128/160/192/224/256/320 kbps,
Bit.Rate
VBR (Variable Bit Rate)
WAV,.AIFF
Sampling.
44.1 kHz
Frequency
Bit.Rate 8/16/24 -bit
Insert the USB memory
1. Insert.your.USB.memory.into.the.USB.MEMORY.
slot.as.shown.in.the.illustration.below .
NOTE
• Never insert or remove a USB memory while this unit's
power is on. Doing so may corrupt the unit's data or the
data on the USB memory.
• Carefully insert the USB memory all the way in—until it
is firmly in place.
• Use USB memory sold by Roland. We cannot guarantee
operation if other products are used.
Play back audio files
1. Insert.the.USB.memory.containing.the.copied.
audio.files.into.the.Lucina.AX-09's.USB.MEMORY.
slot .
2. Press.the.[AUDIO.PLAYER].button .
The [AUDIO PLAYER] button will light and the [
button will blink; now you can play back audio files from
USB memory.
If you press the [AUDIO PLAYER] button once again, the
button will go out; now audio files will not be played.
MEMO
The [ ] button will not blink if USB memory is not
inserted, or if the USB memory contains no song that
can be played.
3. Select.a.song .
When you hold down the [AUDIO PLAYER] button, the
display will show the first three characters of the file name
of the currently selected audio file.
Continue holding down the [AUDIO PLAYER] button, and
press the [INC/+] button to jump to the next song, or press
the [DEC/–] button to jump to the beginning of the song
(or the preceding song if you're already at the beginning
of the song).
MEMO
The songs will be ordered by their file name (in the
order of numerals, uppercase letters, and lowercase
letters).
4. Play.or.stop.the.song .
When you press the [
blinking will light, and the selected audio file will play.
If you press the [
button will blink, and playback will stop.
If you press the [
resume from where it was stopped.
Switching songs during playback
During playback, you can hold down the [AUDIO PLAYER]
button and press the [DEC/–] button to interrupt playback
and return to the beginning of the current song. Similarly,
pressing the [INC/+] button will move to the beginning of
the next song, and resume playback.
MEMO
If you hold down the [AUDIO PLAYER] button and press
the [DEC/–] button at the beginning of the song, you'll
return to the beginning of the preceding song.

Making Audio Player Settings

1. Hold.down.the.[SHIFT].button.and.press.the.
[AUDIO.PLAYER].button;.the.current.audio.player.
setting.will.blink.in.the.display .
2. Continue.holding.down.the.[SHIFT].button,.and.
press.the.[AUDIO.PLAYER].button.once.again.to.
switch.parameters .
After a brief interval, the value will appear; continue
]
holding down the [SHIFT] button, and use the [INC/+] /
[DEC/–] (OCTAVE [+] / [–]) buttons to edit the value.
Parameter Value
L uL
0–127
1 P
P LY
CP
3. To.save.this.setting,.hold.down.the.[SHIFT].button.
and.press.the.[WRITE].button .
] button, the button that was
] button during playback, the lit
] button once again, playback will
Explanation
Audio file playback volume level
Choose whether playback will stop at
(SINGLE PLAY),
the end of the selected song (SINGLE
PLAY) or continue playing to the next
(CHAIN PLAY)
song (CHAIN PLAY).
15