Installing The Bike Mount, Cycling Computer And Speed Sensor; Bike Mount And Cycling Computer - Polar CS100 Gebrauchsanleitung

1.3 INSTALLING THE BIKE MOUNT, CYCLING COMPUTER AND SPEED SENSOR

1.3.1 BIKE MOUNT AND CYCLING COMPUTER

1. You can install the bike mount and the cycling computer on the left or right side of the handlebar or on the stem with
cable ties.
2.
3.
12 – ENGLISH
2. Place the rubber part on the
handlebar or stem and
insert the bike mount on top
of it.
3. Pass the cable ties over the
bike mount and adjust
them around the handlebar/
stem. Secure the bike mount
fi rmly. Cut off any excess
cable tie ends.
4. Position the cycling computer on to the bike mount. Turn
the cycling computer clockwise until you hear a click.
You can release the cycling computer by pressing it
down and simultaneously turning it counter clockwise.